Parkinson Cowan SIG233W Manual de usuario descargar pdf (Pagina 10)

Ignition of the burners

• Push the knob and turn it left to the “large flame“

symbol.

• At the same time, push the electronic ignition

knob (see fig). Keep it pushed until the gas

ignites (1 spark / second).

• Release the knob and watch that the burner

has ignited.

• Upon ignition, adjust the flame as required.

Power Cut

• Push the corresponding knob in completely

and turn it left to the “large flame“ symbol and

ignite with a match.

• Release the knob after 10 seconds and watch

that the burner has ignited.

• Upon ignition, adjust the flame as required.

If for any reason the flame should extinguish turn

off the relevant control knob, leave for at least

one minute and then re-ignite.

If after a few attempts the burner does not ignite,

check that the burner ring and its cap are

correctly positioned.

Turning off the burners

Turn the control knob clockwise to mark «

».

Do not put anything on the hob that is

liable to melt.

Selecting the Correct burner

Above every knob there is a symbol for the

corresponding burner.

For good cooking results, always choose pans,

which correctly fit to the diameter of the burner

used (see figs). Choose thick, flat bottom pots.

We recommend the flame is lowered as soon as

the liquid starts boiling.

For a correct ignition always keep the burner ring

and the spark plugs clean.

The following diameter pans can be used:

Good use

use

(

Power waste

)

Burner Power Diameter (mm)

(kW) min. max.

Rapid 3,00 160 280

Semi-

Rapid

2,00 140 240

Auxiliary 1,00 120 180

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Comentarios a estos manuales

Sin comentarios

Parkinson Cowan SIG233W Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Parkinson Cowan SIG233W